Metal-organic framework-based nanomaterials for CO₂ storage: A review

• Ha Huu Do,
• Iqra Rabani and
• Hai Bang Truong

Beilstein J. Nanotechnol. 2023, 14, 964–970, doi:10.3762/bjnano.14.79

• , including pore size manipulation, post-synthetic modifications, and composite formation. Finally, the extant challenges and anticipated prospects pertaining to the development of MOF-based nanomaterials for CO2 storage are described. Keywords: CO2 storage; metal-organic frameworks; nanomaterials; open

• -organic frameworks (MOFs) promising contenders for CO2 uptake. This review commences by discussing recent advancements in MOFs with diverse adsorption sites, encompassing open metal sites and Lewis basic centers. Next, diverse strategies aimed at enhancing CO2 adsorption capabilities are presented

• ]. Therefore, identification and development of durable and efficient adsorbents are critical to the successful implementation of CCS. Until now, various classes of materials have been investigated for CO2 adsorption, such as covalent organic frameworks, molecular sieves, activated carbon, and metal-organic

Upscaling the urea method synthesis of CoAl layered double hydroxides

• Camilo Jaramillo-Hernández,
• Víctor Oestreicher,
• Martín Mizrahi and
• Gonzalo Abellán

Beilstein J. Nanotechnol. 2023, 14, 927–938, doi:10.3762/bjnano.14.76

• compare different synthesis protocols, as it has been demonstrated for metal-organic frameworks [63][64][65]. As expected, no-changes in STY values for the volumetric scale-up are observed, while in the case of the mass scale-up, there is a linear relation between STY values and initial concentration

Ni, Co, Zn, and Cu metal-organic framework-based nanomaterials for electrochemical reduction of CO₂: A review

• Ha Huu Do and
• Hai Bang Truong

Beilstein J. Nanotechnol. 2023, 14, 904–911, doi:10.3762/bjnano.14.74

• of converting CO2 into valuable chemicals through electrochemical techniques has garnered significant attention. Metal-organic frameworks (MOFs) have occured as highly prospective materials for the reduction of CO2, owing to their exceptional attributes including extensive surface area, customizable

• CO2 conversion. Finally, a meticulous discourse encompasses the challenges encountered and the prospects envisioned for the advancement of MOF-based nanomaterials in the realm of electrochemical reduction of CO2. Keywords: carbon capture; CO2 reduction; electrocatalysis; metal-organic frameworks

• exhibited considerable variation depending on the elemental composition of pure metal catalysts [19]. Notably, Au, Ag, and Zn catalysts exhibit preferential CO generation, while Sn, In, and Pb catalysts prove effective in producing formate ions (HCOO−) [20]. Metal-organic frameworks (MOFs) are established

Metal-organic framework-based nanomaterials as opto-electrochemical sensors for the detection of antibiotics and hormones: A review

• Akeem Adeyemi Oladipo,
• Saba Derakhshan Oskouei and
• Mustafa Gazi

Beilstein J. Nanotechnol. 2023, 14, 631–673, doi:10.3762/bjnano.14.52

• that are time-consuming and require experienced professionals. Metal-organic frameworks (MOFs) with variable porosity, active functional sites, and fluorescence capacity are attractive materials for developing opto-electrochemical sensors. Herein, the insights into the capabilities of electrochemical

• demonstrated a wide linearity range for the detection of the antibiotic. Metal-organic frameworks: properties and synthesis In recent years, there has been a lot of interest in metal-organic frameworks (MOFs) [72][73][74][75], which are extremely porous materials. They are highly crystalline materials with

Molecular nanoarchitectonics: unification of nanotechnology and molecular/materials science

• Katsuhiko Ariga

Beilstein J. Nanotechnol. 2023, 14, 434–453, doi:10.3762/bjnano.14.35

• imaging at the atomic and molecular level has revealed the self-assembly mechanisms of crystal nuclei in organic crystals and metal-organic frameworks [42]. It has become possible to obtain statistical information on the size and structure of individual prenucleation clusters that cannot be examined by

Cyclodextrins as eminent constituents in nanoarchitectonics for drug delivery systems

• Makoto Komiyama

Beilstein J. Nanotechnol. 2023, 14, 218–232, doi:10.3762/bjnano.14.21

• ]. Metal complexes of CyD [93] and metal-organic frameworks (MOFs) containing CyDs [94][95][96] were also developed for DDSs. By combining a thermoresponsive poly(N-isopropylacrylamide) star polymer with a β-CyD core, adamantane-terminated poly(ethylene glycol) polymer, and α-CyD, a supramolecular hydrogel

Design of surface nanostructures for chirality sensing based on quartz crystal microbalance

• Yinglin Ma,
• Xiangyun Xiao and
• Qingmin Ji

Beilstein J. Nanotechnol. 2022, 13, 1201–1219, doi:10.3762/bjnano.13.100

• volatile organic compounds (VOCs) with a remarkable degree of selectivity, which may promote the development of electronic nose systems for chiral analytes. Metal–organic frameworks. Metal–organic frameworks (MOFs) are unique porous crystalline materials fabricated by the self-assembly of metal ions or

Spindle-like MIL101(Fe) decorated with Bi₂O₃ nanoparticles for enhanced degradation of chlortetracycline under visible-light irradiation

• Chen-chen Hao,
• Fang-yan Chen,
• Kun Bian,
• Yu-bin Tang and
• Wei-long Shi

Beilstein J. Nanotechnol. 2022, 13, 1038–1050, doi:10.3762/bjnano.13.91

• China 10.3762/bjnano.13.91 Abstract Improving the photocatalytic performance of metal–organic frameworks (MOFs) is an important way to expand its potential applications. In this work, zero-dimensional (0D) Bi2O3 nanoparticles were anchored to the surface of tridimensional (3D) MIL101(Fe) by a facile

• efficient photocatalysts for CTC degradation. Metal–organic frameworks (MOFs) are a kind of micro- or mesoporous materials established by the self-assembly of organic linkers and metal-cluster or metal-ion nodes [19]. The MOF materials possess large surface areas, high pore volume, tunability, uniform

• –organic frameworks; MIL101(Fe); photocatalysts; Z-scheme heterojunction; Introduction Tetracyclines, as the second most widely used antibiotic in the world, have been widely applied in clinics, aquaculture, and livestock due to its broad-spectrum antibacterial properties and low price [1][2

Recent advances in nanoarchitectures of monocrystalline coordination polymers through confined assembly

• Lingling Xia,
• Qinyue Wang and
• Ming Hu

Beilstein J. Nanotechnol. 2022, 13, 763–777, doi:10.3762/bjnano.13.67

• discuss the properties of the coordination polymer single crystals as well as their performance in energy, environmental, and biomedical applications. Keywords: applications; assembly; coordination polymer; metal-organic frameworks; nanoarchitectonics; Introduction Coordination polymers are hybrid

• growth. However, the hard boundary cannot be deformed or passed through, changing the shape of the crystal far from the intrinsic symmetry. A type of peptide-based metal-organic frameworks (CuGHG, GHG = glycine–ʟ-histidine–glycine) was grown in microfluidic channels [103]. Several branches of the

The role of sulfonate groups and hydrogen bonding in the proton conductivity of two coordination networks

• Ali Javed,
• Felix Steinke,
• Stephan Wöhlbrandt,
• Hana Bunzen,
• Norbert Stock and
• Michael Tiemann

Beilstein J. Nanotechnol. 2022, 13, 437–443, doi:10.3762/bjnano.13.36

• coordination polymers (CPs), such as (porous) metal-organic frameworks (MOFs) and (non-porous, yet cross-linked) coordination networks [12], may offer alternatives to Nafion because of their structural controllability and high crystallinity [13]. The quest to develop new proton-conducting network materials is

Interfacial nanoarchitectonics for ZIF-8 membranes with enhanced gas separation

• Season S. Chen,
• Zhen-Jie Yang,
• Chia-Hao Chang,
• Hoong-Uei Koh,
• Sameerah I. Al-Saeedi,
• Kuo-Lun Tung and
• Kevin C.-W. Wu

Beilstein J. Nanotechnol. 2022, 13, 313–324, doi:10.3762/bjnano.13.26

• -free; gas separation; interfacial synthesis; metal-organic frameworks; ZIF membranes; Introduction Carbon dioxide (CO2) is one of the major greenhouse gases emitted through human activities contributing to global climate change. According to United States Environmental Protection Agency (US EPA), CO2

• rise to specific molecule-sized pores, which yield a high separation factor in the separation processes [9][10][11][12]. Wider application of zeolite membranes in separation is limited by the narrow pore-size range (0.2–2 nm) and the difficult chemical modification. Metal-organic frameworks (MOFs) are

Progress and innovation of nanostructured sulfur cathodes and metal-free anodes for room-temperature Na–S batteries

• Marina Tabuyo-Martínez,
• Bernd Wicklein and
• Pilar Aranda

Beilstein J. Nanotechnol. 2021, 12, 995–1020, doi:10.3762/bjnano.12.75

• this material, improved results are obtained with a cycle life of up to 400 cycles and a small capacity decay rate of 0.044% per cycle. Moreover, Chen et al. [33] reported the potential use of metal-organic frameworks as cathode skeleton. Herein, a sulfur host based on a nanoporous nitrogen-doped

Recent progress in magnetic applications for micro- and nanorobots

• Ke Xu,
• Shuang Xu and
• Fanan Wei

Beilstein J. Nanotechnol. 2021, 12, 744–755, doi:10.3762/bjnano.12.58

• ). Nayak [39] used metal-organic frameworks (MOFs) to adsorb heavy metals in water for water purification. MOFs have a very high specific surface area and modular structure, showing great advantages in the sustainable supply of clean drinking water. Later, Yu et al. [40] reported a method to disassemble

Exploring the fabrication and transfer mechanism of metallic nanostructures on carbon nanomembranes via focused electron beam induced processing

• Christian Preischl,
• Linh Hoang Le,
• Elif Bilgilisoy,
• Armin Gölzhäuser and
• Hubertus Marbach

Beilstein J. Nanotechnol. 2021, 12, 319–329, doi:10.3762/bjnano.12.26

• ) [13], thin layers of porphyrin molecules [14][15], and surface-anchored metal-organic frameworks (SURMOFs) [16][17]. For oxide surfaces it is known that the activation mechanism is based on reactive oxygen vacancies, which are locally created by electron-stimulated oxygen desorption [18][19]. Whereas

Nickel nanoparticles supported on a covalent triazine framework as electrocatalyst for oxygen evolution reaction and oxygen reduction reactions

• Secil Öztürk,
• Yu-Xuan Xiao,
• Dennis Dietrich,
• Beatriz Giesen,
• Juri Barthel,
• Jie Ying,
• Xiao-Yu Yang and
• Christoph Janiak

Beilstein J. Nanotechnol. 2020, 11, 770–781, doi:10.3762/bjnano.11.62

• organic frameworks (MOF) with or without a nitrogen source [13][43][44]. An important step in these syntheses is high-temperature pyrolysis under inert atmosphere for a few hours. However, these methods often cannot control the nitrogen microstructure and composition. In contrast, Ni/CTF-1 is obtained in

• (69 and 71 wt %, respectively, see Table S3, Supporting Information File 1). In the literature, there are various reports on Ni/carbon and Ni/N-doped carbon composites (Table S3, Supporting Information File 1). These composites are largely obtained by pyrolysis of Ni precursors or Ni-containing metal

High-performance asymmetric supercapacitor made of NiMoO₄ nanorods@Co₃O₄ on a cellulose-based carbon aerogel

• Meixia Wang,
• Jing Zhang,
• Xibin Yi,
• Benxue Liu,
• Xinfu Zhao and
• Xiaochan Liu

Beilstein J. Nanotechnol. 2020, 11, 240–251, doi:10.3762/bjnano.11.18

• a capacitance retention of 84.1% after 2000 cycles [23]. Metal-organic frameworks (MOFs) with high porosity and tunable functionality are ideal sacrificial templates to synthesize metal oxides [24][25][26]. As a MOF derivative, Co3O4 derived from the zeolitic imidazolate framework-67 (ZIF-67) is

Air oxidation of sulfur mustard gas simulants using a pyrene-based metal–organic framework photocatalyst

• Ghada Ayoub,
• Mihails Arhangelskis,
• Xuan Zhang,
• Florencia Son,
• Timur Islamoglu,
• Tomislav Friščić and
• Omar K. Farha

Beilstein J. Nanotechnol. 2019, 10, 2422–2427, doi:10.3762/bjnano.10.232

• ’ half-life. This is a considerable improvement to NU-1000, based on a 1,3,6,8-tetrasubstituted pyrene unit, demonstrating how variation of the substitution pattern of a metal–organic framework linker permits modification of its photoactive behavior. Keywords: metal-organic frameworks; oxidation

• selection of solvent choices since solubility of the chromophore does not need to be considered, and lower probability of photobleaching [24][25]. Metal–organic frameworks (MOFs), porous crystalline materials comprised of metal nodes and organic linkers, have attracted tremendous attention in heterogeneous

Synthesis of highly active ETS-10-based titanosilicate for heterogeneously catalyzed transesterification of triglycerides

• Muhammad A. Zaheer,
• David Poppitz,
• Khavar Feyzullayeva,
• Marianne Wenzel,
• Jörg Matysik,
• Radomir Ljupkovic,
• Aleksandra Zarubica,
• Alexander A. Karavaev,
• Andreas Pöppl,
• Roger Gläser and
• Muslim Dvoyashkin

Beilstein J. Nanotechnol. 2019, 10, 2039–2061, doi:10.3762/bjnano.10.200

• removal [13]. Amongst the prospective solid catalysts designed for transesterification reactions, such as calcium [14] and other metal oxides [15], metal–organic frameworks (MOFs) [10], silica-supported catalysts [16], biochar [17] and other biomass-derived catalysts [18], zeolites and molecular sieves

Review of advanced sensor devices employing nanoarchitectonics concepts

• Katsuhiko Ariga,
• Tatsuyuki Makita,
• Masato Ito,
• Taizo Mori,
• Shun Watanabe and
• Jun Takeya

Beilstein J. Nanotechnol. 2019, 10, 2014–2030, doi:10.3762/bjnano.10.198

• nanoarchitectonic control of the structure results in high sensitivity and selectivity. The nanoporous architectures of metal–organic frameworks can also serve as filters for molecular selection. Fan and co-workers prepared an electrical gas sensor for formaldehyde with high selectivity using the molecular sieving

• and resulted in a highly sensitive sensing material for aniline vapor [125]. Layer-by-layer structures of mesoporous carbon capsules can work as sensing membranes capable of selectively sensing through the doping of secondary sensing units [126]. As an emerging nanoporous material, metal–organic

• frameworks and porous coordination polymers have received much attention because of the various functional nanoporous structures that can be engineered through self-assembly from selected components [127][128][129][130]. Pan, Su, and co-workers fabricated metal–organic framework materials with microporous

Nanostructured and oriented metal–organic framework films enabling extreme surface wetting properties

• Andre Mähringer,
• Julian M. Rotter and
• Dana D. Medina

Beilstein J. Nanotechnol. 2019, 10, 1994–2003, doi:10.3762/bjnano.10.196

• . Keywords: antifog; antifouling; biomimetic coatings; metal–organic frameworks (MOFs); superhydrophilic; superoleophobic; thin films; vapor-assisted conversion; Introduction Over millions of years, plants and animals have evolved a spectrum of surface designs enabling specific wetting properties tailored

• development of a straightforward and versatile bottom-up synthesis scheme enabling tunable surface morphologies for controlled wetting properties is still challenging and highly desired. Metal–organic frameworks (MOFs) are porous, crystalline materials featuring a great structural and chemical diversity [40

Charge-transfer interactions between fullerenes and a mesoporous tetrathiafulvalene-based metal–organic framework

• Manuel Souto,
• Joaquín Calbo,
• Samuel Mañas-Valero,
• Aron Walsh and
• Guillermo Mínguez Espallargas

Beilstein J. Nanotechnol. 2019, 10, 1883–1893, doi:10.3762/bjnano.10.183

• /bjnano.10.183 Abstract The design of metal–organic frameworks (MOFs) incorporating electroactive guest molecules in the pores has become a subject of great interest in order to obtain additional electrical functionalities within the framework while maintaining porosity. Understanding the charge-transfer

• increased by two orders of magnitude due to the CT interactions between C60 and the TTF-based framework. Keywords: charge transfer; donor–acceptor; fullerene; metal–organic frameworks (MOFs); tetrathiafulvalene (TTF); Introduction Metal–organic frameworks (MOFs), which are crystalline porous materials

• C60 and discrete π-extended TTF molecules have been extensively studied in solution during the last years [42][43][44][45][46][47]. In contrast, much less is known about their supramolecular interactions in solid-state polymeric structures such as metal–organic frameworks. MOFs using TTF as ligands

Long-term entrapment and temperature-controlled-release of SF₆ gas in metal–organic frameworks (MOFs)

• Hana Bunzen,
• Andreas Kalytta-Mewes,
• Leo van Wüllen and
• Dirk Volkmer

Beilstein J. Nanotechnol. 2019, 10, 1851–1859, doi:10.3762/bjnano.10.180

• frameworks (MOFs); sulfur hexafluoride; Introduction Metal–organic frameworks (MOFs) are coordination polymers with organic ligands containing (potential) voids [1]. Their porosity and high surface area make them attractive materials for adsorption-based applications [2][3][4][5]. MOFs have been suggested

• temperature, vacuum and acid-induced framework decomposition was also investigated. The controlled gas release using elevated temperature has the additional benefit that the host MOF can be reused for further gas capture cycles. Keywords: benzobistriazole; gas storage; kinetic trapping; metal–organic

The impact of crystal size and temperature on the adsorption-induced flexibility of the Zr-based metal–organic framework DUT-98

• Simon Krause,
• Volodymyr Bon,
• Hongchu Du,
• Rafal E. Dunin-Borkowski,
• Ulrich Stoeck,
• Irena Senkovska and
• Stefan Kaskel

Beilstein J. Nanotechnol. 2019, 10, 1737–1744, doi:10.3762/bjnano.10.169

• applications. This work thus extends the limited amount of studies on crystal size effects in flexible MOFs and hopefully motivates further investigations in this field. Keywords: crystal engineering; crystal size; flexible metal–organic frameworks; MOFs; water adsorption; Introduction In the past 20 years

• , research in the area of metal–organic frameworks (MOFs) has delivered various record-holding materials in terms of surface area [1] and gas storage [2] and has also given rise to unprecedented adsorption phenomena [3] often associated with structural transitions. An increasing number of the so-called

Materials nanoarchitectonics at two-dimensional liquid interfaces

• Katsuhiko Ariga,
• Michio Matsumoto,
• Taizo Mori and
• Lok Kumar Shrestha

Beilstein J. Nanotechnol. 2019, 10, 1559–1587, doi:10.3762/bjnano.10.153

• and functions at liquid interfaces are briefly explained in the first parts. The following sections overview several topics on materials nanoarchitectonics at liquid interfaces, such as the preparation of two-dimensional metal-organic frameworks and covalent organic frameworks, and the fabrication of

• –Blodgett method, liquid–liquid interfacial precipitation, instructed assembly, and layer-by-layer assembly to give low-dimensional materials including nanowires, nanowhiskers, nanosheets, cubic objects, molecular patterns, supramolecular polymers, metal-organic frameworks and covalent organic frameworks

• from external disturbances [82][83][84]. Zhong and Xu summarized, in their recent review, the preparation of metal nanoparticles for hydrogen generation from liquid chemical hydrides [85]. In their review, the usage of effective catalysts within low-dimensional cages of metal-organic frameworks was

A highly efficient porous rod-like Ce-doped ZnO photocatalyst for the degradation of dye contaminants in water

• Binjing Hu,
• Qiang Sun,
• Chengyi Zuo,
• Yunxin Pei,
• Siwei Yang,
• Hui Zheng and
• Fangming Liu

Beilstein J. Nanotechnol. 2019, 10, 1157–1165, doi:10.3762/bjnano.10.115

• ]. In recent years, metal organic frameworks (MOFs) have been intensively investigated and widely utilized in various fields, such as electrocatalysis [14], heterogeneous catalysis [15] and photocatalysis [16]. Yang et al. [17] reported that Ga-MOF displayed moderate to high catalytic activity of